So I finally got a new camera using the advice from another thread....
#1
Original Poster
Joined: Jan 2003
Posts: 1,812
Likes: 0
So I finally got a new camera using the advice from another thread....
I got a Pentax IQZ Zoom 130 M 35 mm. I shot a test roll of Black & White film. I commented in my earlier thread how my APS took a lot of blurry pics- it happened again! What seemed to come out blurry were panaramic pics which I had zoomed in on. Actually, many of the zooms came out blurry! Any tips as I (hopefully) leave this week for Italy.
#3
Joined: Jan 2003
Posts: 2,330
Likes: 0
Set the camara down on something sturdy, zoom in on anything, then set the timer and let it take the photo. If that picture comes back sharp, then the problem is you not holding the camera steady enough. <BR><BR>Personally I try to avoid the higher speed films like 400 on up. I don't think they have nearly as fine a quality as the 100 speed film.
#6
Joined: Jan 2003
Posts: 262
Likes: 0
I know you are not supposed to use 800 for everything, but I have been lately, and it has worked great, especially for pictures taken with a zoom lense. I used the Kodak 800 gold. Now, the caveat is that I rarely go anywhere sunny....
#7
Joined: Jan 2003
Posts: 1,766
Likes: 0
800 ISO film exsists only for use in dark conditions and by nature produces more blurry photos. You sacrifice quality for the ablity to get an image in low light. 200 ISO is the best film overall for traveling. I can't believe you even found 800 in a store.
Trending Topics
#8
Joined: Jan 2003
Posts: 8,305
Likes: 0
jor, I seriously question some of your comments. First of all, 800 film can produce excellent results even when used in non-dark situations. And, where do get the idea that 800 film is hard to find? It's readily available nearly everywhere!
#9
Joined: Jan 2003
Posts: 57
Likes: 0
If the blur occurs more when you are using the zoom it is most likely camera shake. Remember to squeeze the shutter, not push it. A tripod is an excellent idea.<BR>The main variable for film selection is the amount of light needed to properly expose the film. (ASA or DIN) Slower film = finer grain, more exposure needed; faster film = coarser grain less exposure needed. <BR>Exposure is a combination of shutter speed and aperature. A wider aperature (bigger opening) reduces the depth of field (more fuzzy) and a smaller aperature increases the depth of field (sharper). Vary the aperature for things which are not moving. If your subject is moving make the shutter speed your primary consideration for the exposure.<BR>I use ASA 200 for general purpose but I also carry ASA 100, 400, 800 and 1000 for special situations.
#13
Joined: Jan 2003
Posts: 8,305
Likes: 0
Whoa, let's clear up a few misconceptions!<BR>First, thanks, wernr, but I am hardly a pro! I do not own an expensive camera or equipment. I attribute any success I've had as a photographer to a good eye, rather than an expensive camera.<BR>Second, in response to julies, 800 film is safe in your carryon luggage. I believe the danger to that xray exposure starts at 1000 or just over 1000. 800 film is safe in your carryon. I've done it many times.<BR>Third, 800 film is indeed generally available where I live--Target, Sam's BJ's and, of course, camera stores, just to mention a few.<BR>I generally use 200 or 400 for "normal" picture taking. When we went to Paris last year, I borrowed a camera, so that I could take indoor and night shots with one (using 800 film) and outdoor shots with the other (using 200 or 400). It worked out perfectly, and I've been doing it that way ever since! It was really the first time I had used 800 film and I was delighted with the results. My indoor shots in the Louvre and d'Orsay Museums came out great, as did a couple of the Eiffel Tower all lit up at night.
Thread
Original Poster
Forum
Replies
Last Post
AP6380
Europe
28
Jan 31st, 2003 09:08 AM




