Fodor's Travel Talk Forums

Fodor's Travel Talk Forums (https://www.fodors.com/community/)
-   Australia & the Pacific (https://www.fodors.com/community/australia-and-the-pacific/)
-   -   Power adapter Australia (https://www.fodors.com/community/australia-and-the-pacific/power-adapter-australia-328850/)

ann2 Jun 18th, 2003 03:59 PM

Power adapter Australia
 
When would I need a three prong grounded adapter? Is it better to use a grounded 3 prong even if my US equipment is only 2 prong? Thanks

johhj_au Jun 18th, 2003 10:06 PM

All power outlets here have the three prong (top two prongs at 45 degrees) configuration. Nearly all appliances have a three prong plug...but is possible to use two prong appliances.

It is possible (but not reccommended) to get a pair of pliers and twist the two prongs on your us appliance to fit...but make sure you have a 220-110 voltage converter before your appliance.

So in summary...get a three prong adapter and make sure you have a 220-110 voltage conversion.

ann2 Jun 19th, 2003 03:40 AM

Thanks, John.
Digital camera battery chargers and even my laptop only has 2 prongs but I will buy some 3 prong australia configurated adapters here to bring along.

ALF Jun 19th, 2003 02:54 PM

Using a 2-prong N. American plug with a 3-prong Oz/NZ adapter will work fine, but of course the grounded connection won't actually be there. Generally, this is not a big deal.

cr Jun 20th, 2003 09:29 AM

I used a converter for all my US electronics such as my camera battery charger and it was fine. Although I did notice my curling iron did get hotter than usual. So be careful with what's being converted and realize that it may be getting more current then it's use to.

MD Jul 4th, 2003 05:35 PM

Most North American electronics come with power bricks that say "100-240V 50-60Hz". They work fine in Europe (and so in the rest of the world). I took my digital camera, CD-writer and laptop to Italy, and they all worked great on 240V. I took a little N.American octopus block to plug them all in.

I have heard a lot of Euro versions of these appliances do NOT have the 100V capability.

Many of those little bricks don't have a 3rd prong anyway...

From experience - if there is a little switch (120-240) such as on your hair dryer, be SURE the switch is seated all the way over into the 240V setting. Ours wasn't quite set, and -oops - no more hair dryer. No spectacular flash, just stopped working with a smell!


All times are GMT -8. The time now is 11:49 PM.